Manual for Samsung Washer WF45B6300AC

The Samsung WF45B6300AC is a 4.5 cubic foot front-load washing machine with Vibration Reduction Technology+, Eco Bubble technology for efficient cleaning, Steam Wash function, 10 wash cycles including Cotton, Synthetic, Wool, Delicates, and Quick Wash, 1400 RPM spin speed, AddWash door for adding items mid-cycle, digital display with LED controls, child lock, delay start, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-load drum, Digital Control Panel, AddWash Door, Detergent Dispenser, Water Inlet Valves, Drain Pump.

FeatureDescription
Capacity4.5 cubic feet for large loads
Wash Cycles10 preset cycles including Cotton, Synthetic, Quick Wash
Steam FunctionSteam Wash for sanitization and stain removal
Eco BubbleActivates detergent for better cleaning at lower temperatures
AddWashAllows adding items mid-cycle through small door
Spin SpeedUp to 1400 RPM for faster drying
Digital DisplayLED screen with cycle progress and settings
Child LockPrevents accidental changes to settings
Delay StartSet wash cycle to start later (up to 24 hours)
VRT PlusVibration Reduction Technology for quiet operation

Installation

Unpack and inspect contents. Place on level floor.

  1. Remove shipping bolts: Use wrench to remove 4 bolts from rear; keep for future moves.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure to standpipe or laundry sink (minimum height 39 inches).
  4. Level the washer: Adjust leveling feet to ensure machine is stable.
  5. Plug into grounded electrical outlet.

WARNING! Do not remove shipping bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in washer; follow initial setup procedure.

  1. Run initial cycle: Select Cotton cycle with hot water to clean drum.
  2. Set preferences: Use control dial to select language, time, and default settings.
  3. Load detergent: Fill detergent, bleach, and fabric softener compartments.
  4. Test operation: Run quick cycle to verify proper function.

CAUTION! Ensure washer is level to prevent excessive vibration during spin cycles.

Specifications

Controls and Settings

Access settings via Control Dial and Digital Buttons. Control Panel: POWER, START/PAUSE, CONTROL DIAL, OPTION BUTTONS.

Cycle Selection: Turn dial to select wash cycles (Cotton, Synthetic, Bedding, etc.). Options: Temperature, Spin Speed, Steam, Pre-Wash, Delay Start. Settings: Child Lock, Sound On/Off, Reset.

Temperature Settings: Cold, 30°C, 40°C, 60°C, 95°C. Spin Speed: No Spin, 400, 600, 800, 1000, 1200, 1400 RPM. Steam Options: Steam Wash, Steam Refresh.

Connecting Utilities

Water Supply: Hot and cold water hoses. Drain: Drain hose to standpipe. Electrical: Grounded outlet.

  1. Turn off water supply before connecting hoses.
  2. Use only Samsung-approved hoses; do not reuse old hoses.
  3. Ensure drain hose is secured and not kinked.
  4. Plug into dedicated 15A circuit; do not use extension cord.

Tip: Check for leaks after initial connections before running first cycle.

Using Wash Cycles

Supports various fabric types and soil levels.

  1. Load laundry: Open main door, load clothes evenly around drum.
  2. Add detergent: Pour into appropriate dispenser compartments.
  3. Select cycle: Turn dial to desired wash cycle.
  4. Adjust options: Set temperature, spin speed, steam if needed.
  5. Start cycle: Press START/PAUSE; display shows remaining time.
  6. Add items mid-cycle: Use AddWash door (available during first 15 minutes).
  7. Complete cycle: Machine beeps when finished; remove clothes promptly.

WARNING! Do not overload washer. Balance load evenly to prevent vibration.

Special Features

Steam Wash: Reduces allergens and removes stains. Eco Bubble: Efficient cleaning with less energy. AddWash: Add forgotten items mid-cycle. Delay Start: Program wash to complete at desired time.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Monthly: Run Tub Clean cycle with affresh tablet. Clean detergent dispenser and door seal regularly.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

UL Listed; complies with FCC Part 15. ENERGY STAR certified. Copyright © Samsung Electronics. For support, visit www.samsung.com or contact 1-800-SAMSUNG.

Troubleshooting

SymptomPossible CauseCorrective Action
Washer won't startPower/doorsCheck power cord; ensure door is closed properly; press START.
Excessive vibrationLeveling/loadCheck leveling feet; redistribute load evenly; remove shipping bolts.
No water fillingWater supplyCheck water valves are on; ensure hoses not kinked; clean inlet filters.
Water not drainingDrain hoseCheck for kinks; ensure proper height; clean drain pump filter.
Error codes displayedVarious issuesRefer to error code chart in manual; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes or press POWER for 8 seconds.

Service: 1-800-SAMSUNG; www.samsung.com/support

Manual for Samsung Washer WF45B6300AC © - All Rights Reserved 2025