Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch duct clamp
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, near electrical outlet, and on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Connect Venting System: Install 4-inch diameter metal ducting, avoid plastic or foil ducts. Keep vent run as short and straight as possible.
- Gas Connection (Gas Models): Connect gas line using approved flexible connector. Check for leaks with soap solution.
- Electrical Connection: Connect to properly grounded 240V outlet for electric models, 120V for gas models. Do not use extension cords.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | DV45H6300GW/A2 |
| Type | Electric/Gas Dryer |
| Color | White / Graphite Steel |
| Capacity | 7.5 cu.ft |
| Noise Level | 65 dB |
| Control Type | LED Display with Touch Controls |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements (Electric) | 240V, 60Hz, 30A |
| Power Requirements (Gas) | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 44 x 29 x 32 inches |
| Weight | 125 lbs |
| Vent Requirements | 4-inch diameter |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
Sensor Dry Technology
Samsung's advanced moisture sensors detect when clothes are dry and automatically shut off the dryer, preventing over-drying and saving energy.
Steam Sanitize+
Steam technology reduces allergens and bacteria by up to 99.9%, removes wrinkles, and refreshes clothes without washing.
Wrinkle Prevent Option
Automatically tumbles clothes periodically after the cycle ends to help prevent wrinkles from setting in.
Eco Dry
Uses lower temperatures to dry clothes, reducing energy consumption while still providing effective drying performance.
Smart Care
Wi-Fi enabled for remote diagnostics, allowing technicians to diagnose issues remotely and provide faster service solutions.
DuraDrum™
Stainless steel drum with ceramic coating resists chipping and scratching, providing gentle care for all fabric types.
Drying Programs Explained
Normal Dry
Standard drying for everyday cotton items and mixed loads
Heavy Dry
Extended drying time for heavily wet items like towels and jeans
Delicates
Low heat setting for delicate fabrics and synthetic materials
Quick Dry
Rapid drying cycle for small loads or lightly damp items
Air Fluff
No heat tumbling to freshen clothes and remove lint
Sanitize
High temperature cycle to eliminate bacteria and allergens
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed, start button not pressed | Check power supply, ensure door is latched, press start firmly |
| No heat | Thermal fuse blown, heating element failure, gas supply issue | Check thermal fuse, test heating element, verify gas supply |
| Clothes not drying | Overloading, clogged lint filter, restricted venting | Reduce load size, clean lint filter, check vent system |
| Unusual noises | Foreign objects in drum, worn rollers, blower wheel issues | Check for objects, inspect rollers and blower wheel |
| Error codes displayed | Sensor failure, motor issues, control board problems | Refer to error code chart, check sensors and connections |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
Error Codes
- tE: Thermistor error - Check temperature sensor
- HE: Heating error - Check heating element or gas ignition
- dE: Door error - Ensure door is fully closed and latched
- LE: Motor error - Check drive motor and connections
- FE: Filter error - Clean lint filter and check airflow
- CE: Communication error - Check control board connections
Manual Downloads
Current Model Manuals
DV45H6300GW
7.5 cu.ft Electric Dryer
DV45H6300GW/A2
7.5 cu.ft Gas Dryer
DV45T8600EV
7.5 cu.ft Smart Dryer
DV45T8600GV
7.5 cu.ft Graphite Dryer
Popular Previous Models
DV42H5600EW
7.3 cu.ft Electric Dryer
DV48J7700EW
7.5 cu.ft Steam Dryer
DV22N6800HW
7.5 cu.ft Heat Pump Dryer
DV45K6500GV
7.5 cu.ft Gas Dryer