Samsung Dryer Repair Manuals

Service Manual & Troubleshooting Guide

Professional Repair Documentation

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Multimeter
  • Voltage tester

Step-by-Step Installation

  1. Choose Installation Location: Select a well-ventilated area with proper clearance from walls and combustible materials.
  2. Remove Shipping Materials: Remove all shipping bolts, brackets, and packaging materials from the dryer.
  3. Ventilation Setup: Install proper exhaust venting with minimal bends and maximum 25 feet length.
  4. Gas Connection (Gas Models): Connect gas line using approved flexible connector and check for leaks with soap solution.
  5. Electrical Connection: Connect to properly grounded 240V outlet for electric models, 120V for gas models.
  6. Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
  7. Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Warning: All installations must be performed by a qualified technician to ensure proper operation and maintain warranty coverage.

Specifications

Model Series DV45H6300EW/A2
Type Electric & Gas Dryer Models
Color White / Stainless Steel
Capacity 7.4 cu. ft.
Noise Level 65 dB
Control Type Electronic Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Power Requirements 240V, 30A (Electric) / 120V, 15A (Gas)
Dimensions (HxWxD) 44 x 29 x 30 inches
Weight 125 lbs
Heat Settings 5 Temperature Settings

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on drive motor
  • Drum Warranty: Lifetime limited warranty
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com

Key Features

Sensor Dry Technology

Samsung's advanced moisture sensors detect when clothes are dry and automatically shut off the dryer, preventing over-drying and saving energy.

Steam Sanitize+

Steam technology reduces allergens and bacteria by up to 99.9% while removing wrinkles, leaving clothes fresh and hygienically clean.

Wrinkle Guard

Automatically tumbles clothes periodically after the cycle ends to help prevent wrinkles from setting in when you can't unload immediately.

Eco Dry

Reduces energy consumption by using lower temperatures and extended drying times, perfect for less soiled loads and delicate fabrics.

Smart Care

Wi-Fi enabled for remote diagnostics and troubleshooting via smartphone app, providing quick solutions for common issues.

Dual Drain

Front and bottom drain options provide flexible installation possibilities to suit any laundry room configuration.

Drying Programs Explained

Normal

Standard drying for cotton and mixed fabrics with medium heat

Heavy Duty

High heat setting for heavily soiled items and thick fabrics

Delicates

Low heat gentle drying for delicate fabrics and synthetics

Quick Dry

Rapid drying cycle for small loads and lightly worn items

Air Fluff

No heat tumbling to freshen and remove lint from fabrics

Sanitize

High temperature cycle to eliminate bacteria and allergens

Troubleshooting

Problem Possible Cause Solution
Dryer won't start Power issue, door not closed, thermal fuse blown Check power supply, ensure door is latched, test thermal fuse
No heat Heating element, thermal fuse, gas valve, igniter Test heating element, check thermal fuse, verify gas supply
Clothes not drying Vent blockage, overloaded, heating element Clean vent system, reduce load size, test heating system
Unusual noises Worn rollers, idler pulley, blower wheel, belt Inspect and replace worn components as needed
Overheating Vent restriction, thermostat failure Clean vent system, test and replace thermostats
Error codes displayed Sensor failure, control board issues Diagnose specific error code, replace faulty components

Common Error Codes

  • tE or tC: Temperature sensor error - Check thermistor and wiring
  • HE or hE: Heating error - Check heating element and thermal fuses
  • dE or dC: Door switch error - Test door switch and wiring
  • LE or LC: Motor error - Check drive motor and connections
  • FE or FC: Fan error - Inspect blower wheel and motor
  • SE or SC: Sensor error - Test moisture sensors and connections

Manual Downloads

Current Model Manuals

DV45H6300EW

7.4 cu. ft. Electric Dryer

DV45H6300GW

7.4 cu. ft. Gas Dryer

DV45T3400EW

7.5 cu. ft. Smart Dryer

DV45T3400GW

7.5 cu. ft. Gas Smart Dryer

Popular Previous Models

DV48J7700EW

7.5 cu. ft. Electric Dryer

DV42H5200EP

7.2 cu. ft. Electric Dryer

DV45K6500EV

7.5 cu. ft. Steam Dryer

DV22N6800HW

7.4 cu. ft. Heat Pump Dryer

Note: For models not listed here, please visit the Samsung Support Website for complete documentation.