Samsung Dryer User Manual

User Manual & Installation Guide

9 kg Capacity

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Drill (for vent installation)

Step-by-Step Installation

  1. Choose Installation Location: Select a location near electrical connection on a solid, level floor with proper ventilation.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
  3. Install Venting System: Connect 4-inch diameter metal venting to the dryer exhaust outlet and route to outside.
  4. Gas Connection (Gas Models): Connect gas line using approved flexible connector (for gas dryer models only).
  5. Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet for electric models or 120V for gas models.
  6. Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
  7. Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series DV45T6000T
Type Electric/Gas Dryer
Color Black Stainless Steel / White
Capacity 9 kg
Noise Level 65 dB
Control Type Touch Controls with LED Display
Energy Rating Energy Star Certified
Power Requirements 240V, 60Hz (Electric) / 120V, 60Hz (Gas)
Dimensions (HxWxD) 87 x 65 x 76 cm
Weight 72 kg
Heat Settings 7 Temperature Settings
Dry Cycles 12 Automatic Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on dryer motor
  • Drum Warranty: Lifetime warranty on stainless steel drum
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com

Key Features

Sensor Dry Technology

Samsung's advanced moisture sensors detect when clothes are dry and automatically shut off the dryer, preventing over-drying and saving energy.

Steam Sanitize+

Steam technology reduces allergens and bacteria by up to 99.9% while removing wrinkles and odors, leaving clothes fresh and hygienically clean.

Wrinkle Prevent Option

Automatically tumbles clothes without heat at the end of the cycle to help prevent wrinkles from setting in when you can't unload immediately.

Smart Care

Quick diagnostics and troubleshooting through the Smart Care app, providing instant support and reducing the need for service calls.

Eco Dry

Energy-efficient drying system that uses lower temperatures and optimized airflow to dry clothes while reducing energy consumption.

Quick Dry

Special cycle that dries small loads in as little as 30 minutes, perfect for when you need specific items dried quickly.

Drying Programs Explained

Normal

Standard drying for everyday cotton items and mixed fabrics

Heavy Duty

Extended drying time for heavily soiled or large items

Delicates

Gentle low-heat drying for delicate fabrics and special care items

Quick Dry

Fast drying cycle for small loads and lightly worn items

Wrinkle Away

Steam cycle that removes wrinkles from dry clothes

Air Fluff

No heat tumbling to freshen items or remove pet hair

Troubleshooting

Problem Possible Cause Solution
Dryer won't start Power issue, door not closed properly, start button not pressed Check power supply, ensure door is latched completely, press and hold start button
Clothes not drying Overloading, clogged lint filter, restricted venting Reduce load size, clean lint filter, check venting system
Dryer is noisy Foreign objects in drum, worn rollers or bearings Check for foreign objects, contact service for mechanical issues
Dryer stops during cycle Overheating, power interruption, unbalanced load Check venting, ensure stable power, redistribute load evenly
Error codes displayed Various system issues detected Refer to error code list below, contact service if persistent
Long drying times Restricted airflow, heavy loads, high humidity Clean lint filter and venting, reduce load size

Error Codes

  • tE: Temperature error - Check venting and airflow
  • tC: Thermistor issue - Contact service center
  • dE: Door not closed properly - Ensure door is fully closed
  • LE: Motor issue - Contact service center
  • UE: Unbalanced load - Redistribute clothes and restart
  • FE: Filter error - Clean lint filter completely

Manual Downloads

Current Model Manuals

DV45T6000T

9kg Electric Dryer

DV45T6000G

9kg Gas Dryer

DV45T6500T

9kg Smart Dryer

DV45T6700T

9kg Steam Dryer

Popular Previous Models

DV42H5000E

7kg Electric Dryer

DV48J7700E

8.8kg Steam Dryer

DV22N6850H

9kg Heat Pump Dryer

DV45K6500G

9kg Gas Dryer

Note: For models not listed here, please visit the Samsung Support Website for complete documentation.