Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Voltage tester
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and adequate clearance on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Install Venting System: Connect 4-inch diameter metal ducting to the dryer exhaust. Avoid sharp bends and long duct runs.
- Gas Connection (if applicable): Connect to gas supply using approved flexible connector. Check for leaks with soap solution.
- Electrical Connection: Connect to a properly grounded 240V, 30A outlet for electric models. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | DV45H6300GW/A2 |
| Type | Electric Dryer |
| Color | White / Graphite Steel |
| Capacity | 7.5 cu.ft |
| Noise Level | 65 dB |
| Control Type | Electronic Touch Controls with LED Display |
| Energy Rating | Energy Star Certified |
| Power Requirements | 240V, 30A, 60Hz |
| Dimensions (HxWxD) | 89 x 76 x 76 cm |
| Weight | 58 kg |
| Drum Material | Stainless Steel |
| Vent Requirements | 4-inch diameter metal duct |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on dryer motor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
Sensor Dry Technology
Samsung's advanced moisture sensors detect when clothes are dry and automatically shut off the dryer, preventing over-drying and saving energy.
Steam Sanitize+
Steam technology reduces allergens and bacteria by up to 99.9%, removes wrinkles, and refreshes clothes without washing.
Wrinkle Prevent Option
Automatically tumbles clothes periodically after the cycle ends to help prevent wrinkles from setting in.
Eco Dry Sensor
Optimizes drying time and temperature to use less energy while still providing effective drying performance.
Smart Care Technology
Wi-Fi enabled for remote monitoring and diagnostics via smartphone app, allowing you to receive cycle completion alerts and troubleshoot issues.
Quick Dry Cycle
Dries small loads in as little as 30 minutes using optimized temperature and airflow settings for time-saving convenience.
Drying Programs Explained
Normal
Standard drying for everyday cotton items and mixed fabrics
Heavy Duty
Extended drying time for heavily soiled or bulky items
Delicates
Gentle low-heat drying for delicate fabrics and synthetics
Quick Dry
Rapid drying for small loads or lightly worn items
Wrinkle Away
Steam cycle that removes wrinkles and refreshes clothes
Air Fluff
No heat tumbling to freshen and fluff pillows and comforters
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not pressed | Check power supply, ensure door is latched completely, press and hold start button |
| Clothes not drying | Lint filter clogged, venting blocked, overloaded | Clean lint filter, check venting system, reduce load size |
| Overheating | Vent restriction, lint buildup, thermistor failure | Clear venting system, clean lint filter and housing, contact service |
| Unusual noises | Foreign objects in drum, worn rollers or belts | Check for foreign objects, inspect drum components |
| Error codes displayed | Sensor issues, heating problems, communication errors | Refer to error code chart, reset dryer, contact service if persistent |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
Error Codes
- tE: Temperature sensor error - Check thermistor and heating system
- dE: Door not closed properly - Ensure door is fully closed
- HE: Heating error - Check heating element and thermal fuses
- LE: Motor issue - Contact service center
- FE: Communication error - Reset dryer, check control board
- OE: Vent blockage - Clear venting system and check airflow
Manual Downloads
Current Model Manuals
DV45H6300GW
7.5 cu.ft Electric Dryer
DV45H6300GV
7.5 cu.ft Graphite Dryer
DV45H6300GW/A2
7.5 cu.ft Smart Dryer
DV45H6300GW/A3
7.5 cu.ft Steam Dryer
Popular Previous Models
DV42H5600EW
7.4 cu.ft Electric Dryer
DV45K6500GV
7.5 cu.ft Graphite Dryer
DV48J7700EW
7.5 cu.ft Smart Dryer
DV22N6800HW
7.4 cu.ft Heat Pump Dryer