Installation Guide
Tools Needed:
- Adjustable wrench
- Gas leak detector solution
- Screwdrivers (flat and Phillips)
- Pipe thread sealant
- Level
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a well-ventilated area near gas line and electrical outlet on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Gas Connection: Connect to gas supply line using approved flexible gas connector. Apply pipe thread sealant to all connections.
- Vent Installation: Install rigid metal venting to exterior. Ensure proper clearance and secure all connections.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Gas Leak Test: Apply leak detector solution to all gas connections and check for bubbles indicating leaks.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | DV45N7000GW |
| Type | Front Load Gas Dryer |
| Color | White |
| Capacity | 7.5 cu.ft |
| Noise Level | 65 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Gas Consumption | 22,000 BTU/hour |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 43 x 29 x 31 inches |
| Weight | 125 lbs |
| Drum Material | Stainless Steel |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com
Key Features
Sensor Dry Technology
Samsung's advanced moisture sensors detect when clothes are dry and automatically shut off the dryer, preventing over-drying and saving energy.
Steam Sanitize+
Steam technology reduces bacteria and allergens by up to 99.9% while removing wrinkles and odors, leaving clothes fresh and hygienically clean.
Wrinkle Prevent Option
Automatically tumbles clothes without heat at the end of the cycle to help prevent wrinkles from setting in.
Quick Dry Cycle
Dries small loads in as little as 30 minutes using optimized temperature and airflow settings.
Smart Care Technology
Wi-Fi enabled for remote monitoring and diagnostics via smartphone app, allowing you to check cycle status and receive maintenance alerts.
Reversible Door
Door can be configured to open from left or right to accommodate different laundry room layouts.
Drying Programs Explained
Normal
Standard drying for cotton and mixed fabrics with medium dryness level
Heavy Duty
Extended drying time for heavily soiled or large items like towels and jeans
Delicates
Gentle low-heat drying for delicate fabrics and synthetic materials
Quick Dry
Rapid drying for small loads using high temperature and airflow
Wrinkle Away
Steam cycle that removes wrinkles and refreshes clothes
Air Fluff
No-heat tumbling to freshen clothes and remove lint
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, gas supply off | Check power supply, ensure door is latched, verify gas valve is open |
| Clothes not drying | Vent blockage, overloaded, incorrect cycle | Clean vent system, reduce load size, select appropriate drying cycle |
| Gas odor detected | Gas leak, improper combustion | Immediately turn off gas supply and contact qualified technician |
| Unusual noises | Foreign objects in drum, worn rollers | Check for foreign objects, inspect and replace rollers if needed |
| Error codes displayed | Sensor issues, vent blockage, component failure | Refer to error code guide, check venting, contact service if needed |
| Lint accumulation | Clogged lint filter, vent system blockage | Clean lint filter after every load, inspect and clean vent system regularly |
Error Codes
- tE: Temperature sensor error - Check sensor connections
- tC: Thermal cutoff activated - Allow unit to cool, check venting
- dE: Door not closed properly - Ensure door is fully closed
- LE: Motor issue - Contact service center
- FE: Flame failure - Check gas supply and ignition system
- VE: Vent blockage - Clean vent system and check airflow
Manual Downloads
Current Model Manuals
DV45N7000GW
7.5 cu.ft Gas Dryer
DV45N7000GV
7.5 cu.ft Graphite Dryer
DV45N7000GB
7.5 cu.ft Black Dryer
DV45N7000GS
7.5 cu.ft Stainless Dryer
Popular Previous Models
DV42H5000GW
7.2 cu.ft Gas Dryer
DV48J7700GW
7.5 cu.ft Steam Dryer
DV45K6500GV
7.5 cu.ft Smart Dryer
DV40J3000GW
7.0 cu.ft Gas Dryer