Installation Guide
Tools Needed:
- Gas leak detection solution
- Adjustable wrench
- Pipe thread sealant
- Screwdrivers (flat and Phillips)
- Level
- Gas pressure gauge
Step-by-Step Installation
- Choose Installation Location: Select a well-ventilated area with proper gas and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Gas Connection: Connect gas supply line using approved gas connectors. Apply pipe thread sealant to all connections.
- Ventilation Setup: Install rigid metal venting with minimal bends. Ensure proper exhaust to outdoors.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Gas Leak Test: Apply leak detection solution to all gas connections. Check for bubbles indicating leaks.
- Test Run: Run the dryer through a complete cycle to check for proper operation and gas combustion.
Specifications
| Model Series | DV45H6300GW/A2 |
| Type | Gas Dryer |
| Color | White |
| Capacity | 7.3 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Gas Consumption | 22,000 BTU/hour |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 44 x 29 x 31 inches |
| Weight | 125 lbs |
| Vent Requirements | 4-inch diameter |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
Sensor Dry Technology
Advanced moisture sensors detect when clothes are dry and automatically shut off the dryer, preventing over-drying and saving energy.
Steam Sanitize+
Steam technology helps to reduce allergens, remove odors, and refresh clothes without washing, using 100% steam power.
Wrinkle Prevent
Automatically tumbles clothes without heat at the end of the cycle to help prevent wrinkles from setting in.
Gas Efficiency
High-efficiency gas burner provides fast drying times while using less energy compared to electric models.
Smart Care Technology
Wi-Fi enabled for remote diagnostics and troubleshooting via smartphone app, providing real-time status updates.
Eco Dry
Energy-saving mode reduces gas consumption by using lower temperatures and extended drying times for delicate fabrics.
Drying Programs Explained
Normal Dry
Standard drying cycle for everyday cotton items with medium dryness level
Heavy Dry
Extended drying time for heavily wet items like towels and jeans
Delicates
Low heat setting for delicate fabrics and synthetic materials
Quick Dry
Rapid drying cycle for small loads or lightly damp items
Air Fluff
No heat tumbling to freshen clothes or remove lint
Sanitize
High-temperature cycle to eliminate bacteria and allergens
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, gas supply | Check power supply, ensure door is latched, verify gas valve is open |
| No heat | Gas supply issue, igniter failure, thermal fuse | Check gas supply, test igniter, verify thermal fuse continuity |
| Clothes not drying | Overloading, clogged lint filter, ventilation issues | Reduce load size, clean lint filter, check venting for obstructions |
| Gas odor detected | Gas leak, improper combustion | Immediately shut off gas, check for leaks, verify proper ventilation |
| Unusual noises | Foreign objects in drum, worn rollers, blower wheel | Check for foreign objects, inspect rollers and blower wheel |
| Error codes displayed | Sensor failure, component malfunction | Refer to error code chart, perform diagnostic tests |
Error Codes
- tE: Thermistor error - Check temperature sensor
- HE: Heating error - Check gas valve and igniter
- dE: Door error - Ensure door is fully closed
- LE: Motor issue - Check drive motor and belt
- FE: Flame error - Check gas supply and ignition
- CE: Communication error - Check control board connections
Manual Downloads
Current Model Manuals
DV45H6300GW
7.3 cu. ft. Gas Dryer
DV50F9A6EVG
7.5 cu. ft. Steam Gas Dryer
DV45H7000GW
7.3 cu. ft. Smart Gas Dryer
DV42H5600GW
7.2 cu. ft. Gas Dryer
Popular Previous Models
DV48J7770EP
7.5 cu. ft. Gas Dryer
DV45K6500GV
7.3 cu. ft. Steam Gas Dryer
DV42H5200EP
7.2 cu. ft. Gas Dryer
DV40J3000GW
7.0 cu. ft. Gas Dryer