Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a well-ventilated location on a solid, level floor away from heat sources.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the tumble dryer.
- Ventilation Setup: Ensure proper ventilation with adequate air circulation around the dryer.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling feet to ensure the dryer is level from front to back and side to side.
- Connect to Drainage (Optional): For condenser models, connect the drain hose if continuous drainage is preferred.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | DV90T8240SX |
| Type | Heat Pump Tumble Dryer |
| Color | Stainless Steel / White |
| Capacity | 9 kg |
| Noise Level | 62 dB |
| Control Type | Digital Display with Touch Controls |
| Energy Rating | A+++ (Most Efficient) |
| Energy Consumption | 176 kWh/year |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 85 x 60 x 62 cm |
| Weight | 58 kg |
| Heat Pump Technology | Yes |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on digital inverter motor
- Heat Pump Warranty: 5 years on heat pump system
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
Heat Pump Technology
Samsung's advanced heat pump technology recycles hot air to dry clothes efficiently, using up to 50% less energy compared to conventional dryers.
Digital Inverter Motor
The digital inverter motor provides precise control over drying cycles, resulting in better fabric care with reduced noise and increased reliability.
Sensor Dry Technology
Intelligent moisture sensors detect when clothes are dry and automatically adjust drying time, preventing over-drying and saving energy.
Anti-Allergy Cycle
Special cycle that uses high temperatures to eliminate up to 99.9% of common allergens and bacteria, perfect for sensitive skin.
Smart Control
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
EcoBubble™ Technology
Creates bubbles that penetrate fabric quickly at low temperatures, ensuring gentle yet effective drying for all fabric types.
Drying Programs Explained
Cotton
Standard drying program for cotton fabrics with adjustable dryness levels
Synthetics
Gentle drying program for synthetic fabrics at lower temperatures
Delicates
Extra gentle cycle for delicate fabrics like silk and lace
Wool
Special program that maintains wool quality and prevents shrinkage
Quick Dry
Rapid drying cycle for small loads in just 30 minutes
Anti-Allergy
Hygiene cycle that eliminates allergens and bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Clothes not drying | Overloading, clogged filter, heat pump issue | Reduce load size, clean filters, check heat pump system |
| Long drying times | Heavy load, high humidity, clogged condenser | Reduce load size, ensure proper ventilation, clean condenser |
| Unusual noises | Foreign objects in drum, unbalanced load | Check for foreign objects, redistribute load evenly |
| Error codes displayed | System malfunction, sensor issues | Refer to error code list, reset dryer, contact service if persistent |
| Vibration during operation | Unbalanced load, uneven floor, improper installation | Redistribute load, level the dryer, check installation |
Error Codes
- tE: Temperature sensor error - Check temperature sensors
- HE: Heater error - Check heating system
- dE: Door not closed properly - Ensure door is fully closed
- LE: Motor issue - Contact service center
- FE: Filter error - Clean or replace filters
- CE: Communication error - Reset dryer, check connections
Manual Downloads
Current Model Manuals
DV90T8240SX
9kg Heat Pump Dryer
DV80T5220AW
8kg Heat Pump Dryer
DV90M5200QW
9kg Smart Dryer
DV70T8240SX
7kg Heat Pump Dryer
Popular Previous Models
DV90K6800CW
9kg EcoBubble Dryer
DV80M5010QW
8kg Sensor Dry
DV90N8377SX
9kg AddWash Dryer
DV70M5010QW
7kg Heat Pump Dryer