Samsung Washer Manual WF42H5000AW/A2

The Samsung WF42H5000AW/A2 is a 4.2 cu. ft. front-loading washing machine with Vibration Reduction Technology+, 10 wash cycles including Normal, Heavy Duty, and Delicates, 5 temperature settings, 5 spin speed options, AddWash door for adding items mid-cycle, Eco Bubble technology for better cleaning, LED digital display, child lock, delay start, and self-clean cycle. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, LED control panel, AddWash door, detergent dispenser, water inlet valves, drain pump.

Feature	Description
Capacity	4.2 cubic feet front-load design
Wash Cycles	10 cycles including Normal, Heavy Duty, Delicates
Temperature Settings	5 temperature options (Cold, 30°C, 40°C, 60°C, 95°C)
Spin Speeds	5 speed options (No Spin, 400, 600, 800, 1200 RPM)
AddWash Door	Allows adding forgotten items during wash cycle
Eco Bubble Technology	Creates bubbles for better detergent penetration
VRT+ Technology	Reduces vibration and noise during operation
LED Display	Shows cycle time, settings, and error codes
Child Lock	Prevents accidental changes to settings
Delay Start	Program wash cycle to start later (up to 24 hours)

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove shipping bolts: Use wrench to remove 4 bolts from rear; keep for future moves.
Connect water supply: Attach hot and cold water hoses to corresponding valves.
Connect drain hose: Secure to standpipe or laundry sink (minimum height 39 inches).
Level the washer: Adjust front leveling feet until machine is stable.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure and leak-free.

First-Time Setup

Power on washer; run initial test cycle.

Remove all packaging materials and shipping bolts.
Connect water supply and turn on both water valves.
Plug in power cord and press POWER button.
Run Clean Tub cycle: Add 1 cup of bleach, select Clean Tub cycle, and run without clothes.
Set preferences: Use control dial and buttons to set default options.

CAUTION! Ensure washer is level to prevent excessive vibration during spin cycles.

Specifications

Capacity: 4.2 cubic feet.
Dimensions: 27" W x 30" D x 39" H.
Color: White (WF42H5000AW/A2).
Wash Cycles: 10 cycles including Normal, Heavy Duty, Delicates, Bedding, Rinse+Spin.
Spin Speeds: Up to 1200 RPM.
Water Connections: Hot and cold water inlet.
Energy Rating: ENERGY STAR certified.
Power Source: 120V AC, 60Hz.
Weight: 170 lbs.

Controls and Settings

Access settings via control dial and button panel. Main Controls: POWER, START/PAUSE, OPTIONS.

Control Dial: Select wash cycles (Normal, Heavy Duty, Delicates, Quick Wash, Bedding, Sanitary, Rinse+Spin, Spin Only, Wool, Clean Tub).

Options: Temperature (Cold, 30°C, 40°C, 60°C, 95°C), Spin Speed (No Spin, 400, 600, 800, 1200 RPM), Soil Level (Light, Normal, Heavy), Delay Start (1-24 hours), Pre Wash, Extra Rinse. Special Features: AddWash, Child Lock, Signal On/Off.

Connecting Water Supply

Hot and cold water connections required for optimal performance.

Turn off water supply valves before connecting.
Connect hoses: Red marker to hot water, blue to cold water.
Hand-tighten connections; do not overtighten.
Check for leaks: Turn on water valves and inspect connections.
Ensure drain hose is properly secured in standpipe.

Tip: Use only new hoses; replace every 5 years to prevent leaks.

Using Wash Cycles

Supports various fabric types and soil levels.

Load clothes: Do not overload; leave space for movement.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Turn dial to desired wash cycle.
Adjust settings: Set temperature, spin speed, and options as needed.
Start cycle: Press START/PAUSE to begin washing.
Add items: Use AddWash door to add forgotten items during first 15 minutes.
Complete cycle: Machine will signal when cycle is finished.

WARNING! Do not open door during high-speed spin cycle. Wait for lock to release.

Special Features

AddWash: Add items mid-cycle through small door. Eco Bubble: Creates bubbles for better cleaning at lower temperatures. VRT+: Reduces vibration during spin cycles. Self Clean: Run monthly to clean drum and prevent odors.

Care & Cleaning

Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run Self Clean cycle every 30 washes. Leave door slightly open between uses to prevent mold.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on control panel.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2024 Samsung; trademarks of Samsung Electronics Co., Ltd. ENERGY STAR certified. For support, visit www.samsung.com or contact 1-800-SAMSUNG.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/door	Check power connection; ensure door is fully closed.
No water filling	Water supply	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Ensure washer is level; redistribute load evenly.
Water not draining	Drain hose	Check for clogs; ensure proper drain height.
Error codes displayed	Various issues	Refer to error code chart in manual; reset if needed.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-SAMSUNG; www.samsung.com