samsung washer wa50r5200aw service manual

The Samsung WA50R5200AW is a 5.0 cubic foot capacity top-load washing machine with advanced features including Vibration Reduction Technology+, Self Clean+ cycle, Stainless Steel Tub, ENERGY STAR certification, 10 wash cycles, 5 wash options, and Digital Inverter Motor with 10-year warranty. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Procedures 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital Inverter Motor, Stainless Steel Tub, Control Panel, Lid Lock, Water Inlet Valves, Drain Pump, VRT+ System.

Feature	Description
Capacity	5.0 cubic feet
Motor	Digital Inverter Motor with 10-year warranty
Wash Cycles	10 cycles including Normal, Heavy Duty, Delicates
Options	5 options including Extra Rinse, Soak, Delay Start
Technology	Vibration Reduction Technology+ (VRT+)
Self Clean	Self Clean+ cycle for tub maintenance
Water Temperature	Cold, Warm, Hot selections
Spin Speed	Adjustable from No Spin to Max Spin
Display	LED digital display with cycle indicators
Lid Lock	Automatic lid lock during operation

Installation

Unpack and inspect contents. Place on level floor surface.

Remove shipping materials: Remove transit bolts and packing materials from rear.
Level the washer: Adjust leveling legs to ensure machine is stable.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Position drain hose properly in standpipe or sink.
Plug into electrical outlet: Use grounded 120V outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure before operation.

First-Time Setup

After installation, perform initial setup procedures.

Remove transit bolts: Use wrench to remove all four transit bolts from rear panel.
Level the unit: Adjust front leveling legs until machine is stable and doesn't rock.
Connect water supply: Ensure hot/cold hoses are connected to correct faucets.
Run test cycle: Run empty Normal cycle to verify proper operation.
Set preferences: Configure default settings through control panel.

CAUTION! Never operate without removing transit bolts. Ensure proper leveling to prevent vibration.

Specifications

Capacity: 5.0 cubic feet
Dimensions: 28.5" W x 28.5" D x 44.5" H
Weight: 150 lbs
Motor: Digital Inverter Motor
Voltage: 120V AC, 60Hz
Water Pressure: 20-116 psi
Wash Cycles: 10 cycles
Options: 5 options
Color: White
Warranty: 1-year parts and labor, 10-year motor

Controls and Settings

Control Panel: POWER, CYCLE SELECTION, OPTIONS, START/PAUSE, TEMPERATURE, SPIN SPEED.

Wash Cycles: Normal, Heavy Duty, Delicates, Bedding, Quick Wash, Rinse+Spin, Spin Only, Self Clean+, Sanitize, Active Wear.

Options: Extra Rinse, Soak, Delay Start, Pre Wash, Signal On/Off. Temperature Settings: Cold, Cool, Warm, Hot. Spin Speed: No Spin, Delicates, Gentle, Normal, High, Max Spin.

Connecting Utilities

Water Connections: Hot and cold water inlet hoses. Drain: Drain hose connection. Electrical: Standard 120V outlet.

Turn off water supply before connecting hoses.
Use only new hoses; do not reuse old hoses.
Ensure drain hose is properly secured in standpipe.
Plug into grounded electrical outlet only.

Tip: Check for leaks after initial connections before first use.

Operating Procedures

Standard washing operation steps.

Load laundry: Do not overload; leave space for movement.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Choose appropriate wash cycle for load type.
Set options: Select temperature, spin speed, and additional options.
Start cycle: Press START/PAUSE to begin washing.
Monitor operation: Lid locks automatically during cycle.
Complete cycle: Machine signals when cycle is finished.
Remove laundry: Promptly remove clean laundry.

WARNING! Do not open lid during spin cycle. Use only HE detergent.

Maintenance Features

Self Clean+ Cycle: Run monthly to clean tub and prevent odors. Error Codes: Display shows error codes for service diagnostics. Lid Lock: Safety feature prevents opening during operation.

Care & Cleaning

Exterior: Wipe with soft damp cloth; do not use abrasive cleaners. Interior: Run Self Clean+ cycle monthly. Dispensers: Clean detergent and bleach dispensers regularly.

CAUTION! Unplug before cleaning. Do not use harsh chemicals or abrasive cleaners.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Check power connection; ensure lid is closed properly.
No water filling	Water supply/hoses	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Re-level machine; redistribute load evenly.
Water not draining	Drain hose/clog	Check drain hose position; clear any obstructions.
Error codes displayed	Various issues	Refer to error code chart in manual; reset if needed.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com