Samsung Washer WA55CG7100AVUS User Manual

The Samsung WA55CG7100AVUS is a 5.5-cubic-foot capacity top-loading washing machine with advanced features including Vibration Reduction Technology+, Super Speed wash cycle, Self Clean+ cycle, AddWash door, Digital Inverter Motor, and Smart Care technology. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Smart Features 7. Using Wash Cycles 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Top-loading drum with AddWash door, Digital Inverter Motor, Control Panel with LED display, Vibration Reduction Technology+, Self Clean+ cycle.

Feature	Description
AddWash Door	Allows adding items mid-cycle
Digital Inverter Motor	Energy-efficient and quiet operation
Super Speed Wash	Complete wash in under 30 minutes
Vibration Reduction Technology+	Reduces noise and vibration during spin cycles
Self Clean+	Automatically cleans the drum
Smart Care	Diagnostic and troubleshooting feature
Water Level Sensor	Automatically adjusts water usage
LED Display	Shows cycle time and settings
Child Lock	Prevents accidental changes to settings
Delay Start	Delays cycle start up to 24 hours

Installation

Unpack and inspect contents. Place on level floor surface.

Remove shipping bolts: Use wrench to remove 4 bolts from rear panel.
Level the washer: Adjust leveling feet until machine is stable.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Ensure proper drainage into standpipe or laundry tub.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; lift with care to avoid injury. Ensure all connections are secure and water hoses are properly tightened.

First-Time Setup

Power on washer; follow initial setup procedure.

Run initial test cycle: Select Self Clean+ cycle to clean drum before first use.
Set preferences: Configure default settings like temperature and spin speed.
Download SmartThings app: For Smart Care features and remote monitoring.
Test all functions: Verify water filling, agitation, spinning, and draining.

CAUTION! Ensure washer is level to prevent excessive vibration during spin cycles.

Specifications

Capacity: 5.5 cubic feet
Dimensions: 29" W x 44" H x 30" D
Weight: 180 lbs
Motor: Digital Inverter Motor with 10-year warranty
Water Connections: Hot and Cold water inlet
Voltage: 120V, 60Hz
Wash Cycles: 11 cycles including Super Speed, Heavy Duty, Delicates
Spin Speeds: 5 speeds up to 1300 RPM
Water Temperature: Cold, Warm, Hot options
Smart Features: Wi-Fi enabled with SmartThings compatibility

Controls and Settings

Access settings via control panel. Main Controls: POWER, CYCLE SELECTION, TEMPERATURE, SPIN SPEED, OPTIONS.

Display: Shows cycle time, settings, and error codes. Buttons: START/PAUSE, DELAY START, CHILD LOCK, ADDWASH.

Cycle Selection: Normal, Heavy Duty, Bedding, Delicates, Quick Wash, Rinse+Spin, Spin Only, Self Clean+. Options: Pre Wash, Extra Rinse, Stain Removal, Soil Level. Temperature: Cold, Cool, Warm, Hot. Spin Speed: No Spin, Low, Medium, High, Extra High.

Connecting to Smart Features

SmartThings App: Download from app store and connect washer to home Wi-Fi.

Enable Wi-Fi on washer through settings menu.
Open SmartThings app and follow pairing instructions.
Scan QR code on washer or enter model number manually.
Connect to home Wi-Fi network.

Tip: Ensure strong Wi-Fi signal near laundry area for reliable connectivity.

Using Wash Cycles

Supports various fabric types and soil levels.

Load laundry: Do not overload; leave space for agitation.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Choose appropriate cycle for fabric type.
Adjust settings: Set temperature, spin speed, and additional options.
Start cycle: Press START/PAUSE button.
Add items mid-cycle: Use AddWash door to add forgotten items.
Monitor progress: LED display shows remaining time.
Remove laundry promptly after cycle completion.

WARNING! Do not overload washer. Use only HE (High-Efficiency) detergent.

Maintenance Features

Self Clean+: Run monthly to clean drum and prevent odors. Smart Care: Diagnose issues through app. Error Code Display: Shows specific error codes for troubleshooting.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run Self Clean+ cycle regularly.

CAUTION! Do not use abrasive cleaners. Keep control panel dry during cleaning.

Regulatory Information

UL Listed; complies with US safety standards. Energy Star certified for energy efficiency. Copyright © 2023 Samsung Electronics. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/child lock	Check power connection; ensure child lock is off; close lid properly.
No water filling	Water supply/valves	Check water valves are open; ensure hoses not kinked; clean inlet filters.
Excessive vibration	Leveling/load balance	Ensure washer is level; redistribute load evenly; remove shipping bolts.
Water not draining	Drain hose/clog	Check drain hose for kinks; clean drain pump filter; ensure proper height.
Error codes displayed	Various issues	Refer to error code chart in manual; use Smart Care feature for diagnosis.

Reset: Unplug for 1 minute then restart. Use Smart Care for automated diagnosis.

Service: 1-800-SAMSUNG; www.samsung.com/us/support