samsung washer wf42h5000aw/a2 manual

The Samsung WF42H5000AW/A2 is a 4.2 cubic foot front-load washing machine with Vibration Reduction Technology+, 10 wash cycles including Steam Wash, Energy Star certification, LED display, stainless steel drum, and advanced stain removal capabilities. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-load design, LED control panel, stainless steel drum, detergent dispenser, water inlet valves, drain pump.

FeatureDescription
Capacity4.2 cubic feet stainless steel drum
Wash Cycles10 cycles including Normal, Heavy Duty, Delicates, Steam
Control PanelLED display with rotary dial and touch buttons
Steam FunctionSanitize and refresh clothing
VRT PlusVibration Reduction Technology for quiet operation
Stain RemovalAdvanced stain treatment options
Energy StarEnergy efficient operation
Water TemperatureCold, Warm, Hot options
Spin SpeedVariable spin speeds up to 1300 RPM
Delay StartUp to 24-hour delay timer

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove shipping bolts: Use wrench to remove 4 bolts from rear panel.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure drain hose to standpipe or laundry sink.
  4. Level the machine: Adjust leveling feet to ensure machine is stable.
  5. Plug into grounded electrical outlet.

WARNING! Do not remove shipping bolts until machine is in final position. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on washer; run initial test cycle.

  1. Install shipping bolt plugs: Insert plastic plugs into bolt holes.
  2. Run cleaning cycle: Select Tub Clean cycle without laundry.
  3. Set preferences: Configure default settings, child lock, buzzer volume.
  4. Load detergent: Fill detergent, bleach, and fabric softener dispensers.
  5. Test operation: Run quick wash cycle to verify proper function.

CAUTION! Ensure all shipping materials are removed before first use.

Specifications

Controls and Settings

Access settings via rotary dial and touch buttons. Control Panel: POWER, START/PAUSE, OPTIONS, STEAM.

Display: Cycle time remaining, selected options, error codes.

Cycle Selection: Normal, Heavy Duty, Bedding, Delicates, Hand Wash, Speed Wash, Stain Removal, Steam, Tub Clean, Rinse+Spin. Options: Temperature, Spin Speed, Soil Level, Steam, Pre Wash, Extra Rinse, Delay Start. Settings: Buzzer Volume, Child Lock, Default Settings.

Connecting Utilities

Water Supply: Hot and cold water connections. Drain: Drain hose connection. Electrical: Grounded outlet.

  1. Turn off water supply before connecting hoses.
  2. Use only new hoses; do not reuse old hoses.
  3. Ensure drain hose is secured and not kinked.
  4. Plug into dedicated 120V, 15A grounded outlet.

Tip: Install drip pan if washer is on upper floor.

Operating Cycles

Supports various fabric types and soil levels.

  1. Load laundry: Distribute items evenly around drum.
  2. Add detergent: Use appropriate compartment for detergent type.
  3. Select cycle: Turn dial to desired wash cycle.
  4. Set options: Adjust temperature, spin speed, and additional features.
  5. Start cycle: Press START/PAUSE to begin washing.
  6. Monitor progress: LED display shows time remaining.
  7. Unload promptly: Remove laundry when cycle completes.

WARNING! Do not overload machine. Maximum capacity: 4.2 cu ft.

Special Features

Steam Function: Sanitizes and reduces wrinkles. VRT Plus: Reduces vibration and noise. Stain Removal: Targeted treatment for common stains. Delay Start: Program wash cycles up to 24 hours in advance.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run Tub Clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

UL listed; complies with FCC Part 15. Energy Star certified. Copyright © Samsung Electronics. For support, visit www.samsung.com or contact 1-800-SAMSUNG. Model WF42H5000AW/A2.

Troubleshooting

SymptomPossible CauseCorrective Action
Washer won't startPower/doorCheck power cord; ensure door is fully closed; press START.
No water fillingWater supplyCheck water valves are on; inspect hoses for kinks.
Excessive vibrationLeveling/loadEnsure machine is level; redistribute laundry evenly.
Water not drainingDrain hoseCheck for clogs; ensure drain hose is properly installed.
Error codes displayedVarious issuesRefer to error code chart in manual; reset machine.

Reset: Unplug for 1 minute or press POWER for 5 seconds.

Service: 1-800-SAMSUNG; www.samsung.com

Samsung Washer WF42H5000AW/A2 Manual © - All Rights Reserved 2025