Samsung Washer WF45A6400AV User Manual

The Samsung WF45A6400AV is a 4.5 cubic foot capacity front-load washing machine with advanced features including Super Speed wash, Vibration Reduction Technology+, AddWash door, Steam cycle, Smart Care, and Energy Star certification. This manual covers safety guidelines, installation, operation, maintenance, and troubleshooting for optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Water and Drain 7. Washing Cycles and Options 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-load design, digital display, AddWash door, detergent dispenser, water inlet valves, drain pump, and vibration reduction system.

FeatureDescription
Super Speed WashWashes full load in under 30 minutes
AddWash DoorAdd forgotten items during wash cycle
Steam CycleRemoves allergens and reduces wrinkles
Vibration Reduction Technology+Reduces noise and vibration during spin
Smart CareDiagnostics and troubleshooting via smartphone
Energy Star CertifiedEnergy efficient operation
Digital DisplayShows cycle time and settings
Detergent DispenserHolds liquid or powder detergent
Child LockPrevents accidental changes to settings
Delay StartSet wash cycle to start later

Installation

Unpack and inspect contents. Place on level surface near water and drain connections.

  1. Remove shipping bolts: Use wrench to remove four bolts from rear panel.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure to standpipe or laundry sink.
  4. Level the machine: Adjust front leveling feet until machine is stable.
  5. Plug into grounded electrical outlet.

WARNING! Do not remove shipping bolts before installation. Ensure machine is level to prevent vibration.

First-Time Setup

Power on washer; follow initial setup procedure.

  1. Run initial cycle: Select Clean Washer cycle to remove any residue.
  2. Set preferences: Configure default settings like temperature and spin speed.
  3. Install Smart Care app: Download Samsung Smart Care for remote monitoring.
  4. Test operation: Run quick wash cycle to verify proper function.

CAUTION! Ensure water connections are tight and no leaks before first use.

Specifications

Controls and Settings

Access controls via front panel display and dial. Main Controls: Power, Cycle Selector, Start/Pause, Options.

Display: Shows cycle time, settings, and error codes. Dial: Select wash cycles (Normal, Heavy Duty, Delicates, etc.). Options: Temperature, Spin Speed, Soil Level, Steam, Delay Start.

Settings: Temperature (Cold, Warm, Hot), Spin Speed (No Spin to 1400 RPM), Soil Level (Light, Normal, Heavy), Steam (On/Off), Delay Start (1-24 hours). Special Features: Child Lock, Self Clean+, AddWash.

Connecting to Water and Drain

Water Inlet: Hot and cold water connections. Drain: Drain hose connection.

  1. Turn off water supply before connecting hoses.
  2. Connect hot water to red valve, cold water to blue valve.
  3. Secure drain hose to standpipe (maximum height 96 inches).
  4. Check for leaks after connections are made.

Tip: Use thread seal tape on hose connections to prevent leaks.

Washing Cycles and Options

Supports multiple fabric types and soil levels.

  1. Select cycle: Turn dial to desired wash cycle.
  2. Adjust options: Set temperature, spin speed, soil level.
  3. Add detergent: Pour into dispenser drawer.
  4. Load clothes: Do not overload drum.
  5. Start cycle: Press Start/Pause button.
  6. Add items: Use AddWash door during cycle if needed.
  7. Complete: Machine beeps when cycle finishes.

WARNING! Do not overload washer. Maximum capacity 4.5 cubic feet.

Smart Features

Smart Care: Download app for diagnostics and troubleshooting. AddWash: Add forgotten items during wash cycle. Steam: Reduces allergens and wrinkles.

Care & Cleaning

Clean exterior with damp cloth. Run Clean Washer cycle monthly. Clean detergent dispenser and door seal regularly.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

UL Listed; complies with FCC Part 15. Energy Star certified. Copyright © 2023 Samsung Electronics. For support, visit www.samsung.com or contact 1-800-SAMSUNG.

Troubleshooting

SymptomPossible CauseCorrective Action
Washer won't startPower/child lockCheck power connection; ensure child lock is off.
No water fillingWater supplyCheck water valves are open; inspect hoses for kinks.
Excessive vibrationLeveling/loadEnsure machine is level; redistribute load evenly.
Water not drainingDrain hoseCheck drain hose for clogs; ensure proper height.
Error codes displayedVarious issuesRefer to error code chart in manual; use Smart Care app.

Reset: Unplug for 1 minute then restart.

Service: 1-800-SAMSUNG; www.samsung.com

Samsung Washer WF45A6400AV User Manual © - All Rights Reserved 2025