samsung washer wf45b6300aw manual

The Samsung WF45B6300AW is a 4.5 cubic foot front-loading washer with Vibration Reduction Technology+, Eco Bubble™ washing technology, Steam Wash option, 10 wash cycles including Heavy Duty, Normal, Delicates, and Quick Wash, 5 temperature settings, 5 spin speed options, LED display, child lock, delay start, and self-clean cycle. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, LED control panel, detergent dispenser, water inlet valves, drain pump, vibration reduction system.

Feature	Description
Capacity	4.5 cubic feet front-loading drum
Wash Cycles	10 cycles including Heavy Duty, Normal, Delicates
Eco Bubble™	Creates bubbles for better cleaning at lower temperatures
Steam Wash	Removes allergens and reduces wrinkles
VRT Plus	Vibration Reduction Technology for quiet operation
LED Display	Shows cycle time, settings, and error codes
Delay Start	Program wash cycles up to 24 hours in advance
Child Lock	Prevents accidental changes to settings
Self Clean	Automatically cleans the drum and detergent dispenser
Temperature Control	5 temperature settings from cold to hot

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove shipping bolts: Use wrench to remove 4 bolts from rear panel.
Connect water supply: Attach hot and cold water hoses to corresponding valves.
Connect drain hose: Secure to standpipe or laundry sink.
Level the washer: Adjust leveling feet to prevent vibration.
Plug into grounded electrical outlet.

WARNING! Do not remove shipping bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run initial setup cycle.

Check water connections: Turn on water supply valves, check for leaks.
Run cleaning cycle: Select Self Clean cycle to prepare drum for first use.
Set preferences: Configure default settings like temperature and spin speed.
Test operation: Run quick wash cycle with small load to verify operation.

CAUTION! Ensure washer is level and all shipping materials are removed before first use.

Specifications

Capacity: 4.5 cubic feet
Type: Front-loading washer
Color: White
Wash Cycles: 10 cycles including Heavy Duty, Normal, Delicates, Quick Wash
Spin Speeds: 5 options up to 1300 RPM
Temperature Settings: 5 settings (Cold, 30°C, 40°C, 60°C, 95°C)
Special Features: Eco Bubble™, Steam Wash, VRT Plus, Delay Start
Power Source: 120V AC, 60Hz
Water Connections: Hot and cold water inlet
Dimensions: 27" W x 39" H x 31.5" D

Controls and Settings

Control panel includes POWER, CYCLE SELECTION, TEMPERATURE, SPIN SPEED, OPTIONS, and START/PAUSE buttons.

Cycle Selection: Heavy Duty, Normal, Delicates, Quick Wash, Wool, Bedding, Sanitize, Rinse+Spin, Spin Only, Self Clean. Temperature Settings: Cold, 30°C, 40°C, 60°C, 95°C. Spin Speed: No Spin, 400, 600, 800, 1000, 1300 RPM. Options: Steam, Pre Wash, Extra Rinse, Delay Start, Child Lock.

Connecting Water Supply

Connect to standard hot and cold water supply lines.

Turn off water supply before connecting hoses.
Connect blue-marked hose to cold water valve.
Connect red-marked hose to hot water valve.
Secure drain hose to standpipe (minimum height 39 inches).
Turn on water supply and check for leaks.

Tip: Use new hoses and ensure washers are properly seated to prevent leaks.

Operating the Washer

Follow these steps for normal operation.

Load laundry: Do not overload; leave space for items to move freely.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Choose appropriate cycle for fabric type and soil level.
Set options: Adjust temperature, spin speed, and additional features.
Start cycle: Press START/PAUSE to begin washing.
Unload promptly: Remove clothes immediately after cycle completes.

WARNING! Do not overload washer. Use only HE (High Efficiency) detergent.

Special Features

Eco Bubble™: Creates active oxygen bubbles for deep cleaning at low temperatures. Steam Wash: Uses steam to remove allergens and reduce wrinkles. VRT Plus: Reduces vibration and noise during spin cycles. Self Clean: Automatically cleans drum every 40 cycles or when prompted.

Care & Cleaning

Regular maintenance ensures optimal performance.

Clean drum: Run Self Clean cycle monthly.
Clean detergent dispenser: Remove and rinse monthly.
Clean door seal: Wipe with damp cloth to remove residue.
Clean exterior: Wipe with soft, damp cloth.

CAUTION! Unplug washer before cleaning. Do not use abrasive cleaners.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/child lock	Check power connection; ensure child lock is off; close door properly.
No water filling	Water supply	Check water valves are on; inspect hoses for kinks; clean inlet filters.
Excessive vibration	Leveling/load	Ensure washer is level; redistribute load evenly; remove shipping bolts.
Water not draining	Drain hose	Check drain hose for kinks or clogs; clean pump filter.
Error codes displayed	Various issues	Refer to error code chart in manual; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes or press POWER for 10 seconds.

Service: 1-800-SAMSUNG; www.samsung.com