Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe wrench
Step-by-Step Installation
- Choose Installation Location: Select a level, solid floor location near water and electrical connections with adequate ventilation.
- Remove Shipping Materials: Remove all transit bolts and packaging materials from the washing machine.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves using new hoses only.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with proper height to prevent siphoning.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz outlet. Do not use extension cords or adapters.
- Level the Washing Machine: Adjust the leveling feet to ensure the machine is perfectly level in all directions.
- Test Run: Run an empty cycle to check for leaks, proper operation, and verify all connections.
Specifications
| Model Series | WW90T684DLH |
| Type | Front Load Washing Machine |
| Color | Black Stainless / White |
| Capacity | 9 kg |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Digital Inverter Touch Control |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9,200 L/year |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 85 x 60 x 55 cm |
| Weight | 67 kg |
| Max Spin Speed | 1400 RPM |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on Digital Inverter Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com
Parts Catalog
Digital Inverter Motor
Samsung's Digital Inverter Motor provides powerful, quiet, and energy-efficient performance with direct drive technology and fewer moving parts for enhanced durability.
EcoBubble™ Technology
Creates bubbles that penetrate fabric quickly, activating detergent at lower temperatures for effective cleaning while being gentle on clothes and saving energy.
AddWash™ Door
Special door-within-a-door design allows you to add forgotten items mid-cycle without stopping the wash, providing ultimate convenience and flexibility.
Self-Clean+
Automatically cleans the inside of the drum and removes bacteria with high-speed spinning and hot water, keeping your machine fresh and hygienic.
Smart Control
Wi-Fi enabled for remote monitoring and control via smartphone app, allowing cycle customization, diagnostics, and firmware updates.
Vibration Reduction Technology+
Advanced technology minimizes noise and vibration during spin cycles, ensuring quiet operation even at high speeds.
Replacement Parts Information
Door Seal
Genuine Samsung rubber door seal replacement for optimal water containment and durability
Drain Pump
High-efficiency drain pump assembly for reliable water removal and long service life
Heater Element
Stainless steel heating element for consistent water temperature control
Control Board
Main electronic control unit with advanced diagnostics and program management
Shock Absorbers
Vibration dampening system components for smooth operation during spin cycles
Door Lock
Safety interlock mechanism ensuring door remains closed during operation
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine won't start | Power disruption, door not closed, child lock activated | Check power supply, ensure door closure, deactivate child lock |
| Inadequate cleaning | Overloading, incorrect detergent, wrong cycle selection | Reduce load size, use HE detergent, select proper wash cycle |
| Water drainage issues | Clogged drain filter, kinked hose, pump obstruction | Clean drain filter, straighten hose, check pump for blockages |
| Water leakage | Door seal damage, over-sudsing, loose connections | Inspect door seal, reduce detergent, tighten all connections |
| Unusual noises | Foreign objects, unbalanced load, worn bearings | Remove foreign objects, balance load, check drum bearings |
| Excessive vibration | Uneven floor, improper leveling, transit bolts not removed | Level machine, ensure floor stability, remove all transit bolts |
Error Codes
- 4E/5E: Water supply issue - Check water pressure and inlet valve
- 3E/3C: Drain problem - Check drain hose and pump filter
- 1E/1C: Motor issue - Contact authorized service center
- dE/dC: Door not closed - Ensure door is fully latched
- UE/UC: Unbalanced load - Redistribute clothes evenly
- OE/OC: Overflow detected - Check water level sensor
Manual Downloads
Current Model Manuals
WW90T684DLH
9kg AddWash™ Washer
WW80T554DAN
8kg EcoBubble™ Washer
WW10T634DLH
10.5kg Smart Control
WW90TA049AE
9kg Bespoke Washer
Popular Previous Models
WW90J6410CW
9kg QuickDrive™
WW80J5555MW
8kg EcoBubble™
WW10H9600EW
10.5kg AddWash™
WW70J3283LW
7kg Digital Inverter