Samsung Washing Machine WD0804W8E User Manual

The Samsung WD0804W8E is an 8kg capacity front-load washing machine with advanced Eco Bubble technology, Digital Inverter Motor, 1400 RPM spin speed, multiple wash programs, energy efficiency rating A+++, child lock, delay start, and self-cleaning functions. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-load drum, Digital Inverter Motor, Eco Bubble technology, LED display, Control panel, Water inlet valves, Drain pump.

FeatureDescription
Eco Bubble technologyCreates bubbles for better detergent penetration
Digital Inverter MotorQuiet operation with 10-year warranty
1400 RPM spin speedFaster drying with reduced moisture
LED displayShows time remaining and cycle status
Multiple wash programsCotton, Synthetic, Quick Wash, Delicates, etc.
Child LockPrevents accidental program changes
Delay StartProgram start time up to 24 hours
Self Clean+Automatic drum cleaning cycle
Add DoorAllows adding forgotten items mid-cycle
Energy RatingA+++ for maximum energy efficiency

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use wrench to remove 4 bolts from rear panel.
  2. Connect water supply: Attach hoses to hot and cold water taps (if applicable).
  3. Connect drain hose: Place in standpipe or sink with proper height.
  4. Level the machine: Adjust front feet to ensure machine is stable.
  5. Plug into grounded electrical outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Connect power and water; run initial test cycle.

  1. Open water taps: Turn both hot and cold water valves fully open.
  2. Power on: Press POWER button on control panel.
  3. Run cleaning cycle: Select Self Clean+ program to clean drum before first use.
  4. Set preferences: Configure default settings like temperature, spin speed.
  5. Test operation: Run quick wash cycle with no laundry to verify operation.

CAUTION! Ensure machine is properly leveled to prevent vibration and movement during spin cycles.

Specifications

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR, TEMPERATURE, SPIN SPEED, OPTION buttons.

Programs: Cotton (40°C, 60°C, 90°C), Synthetic (40°C, 60°C), Quick Wash (15min, 30min), Delicates, Wool, Sport, Rinse+Spin, Spin Only, Self Clean+.

Temperature: Cold, 30°C, 40°C, 60°C, 90°C. Spin Speed: No Spin, 400, 600, 800, 1000, 1200, 1400 RPM. Options: Pre Wash, Extra Rinse, Delay Start, Child Lock.

Connecting Utilities

Water supply: Hot and cold water connections. Drain: Hose to standpipe or sink.

  1. Turn off water supply before connecting hoses.
  2. Use only supplied hoses; do not reuse old hoses.
  3. Ensure drain hose is secured at proper height (60-100cm).
  4. Check for leaks after connections.

Tip: Install water hammer arrestors if water pressure fluctuates.

Operating the Washer

Supports various fabric types and soil levels.

  1. Load laundry: Open door, load items evenly around drum.
  2. Add detergent: Use drawer compartments for pre-wash, main wash, and fabric softener.
  3. Select program: Turn PROGRAM SELECTOR to desired wash cycle.
  4. Adjust settings: Set temperature, spin speed, and options as needed.
  5. Start cycle: Press START/PAUSE to begin washing.
  6. Add items: Use Add Door feature within first 10 minutes if needed.
  7. Complete cycle: Machine beeps when finished; remove laundry promptly.

WARNING! Do not overload machine. Maximum capacity 8kg dry weight.

Special Features

Eco Bubble: Activates bubbles for better cleaning at lower temperatures. Add Door: Allows adding forgotten items. Child Lock: Press and hold TEMPERATURE and SPIN SPEED for 3 seconds. Delay Start: Program start time up to 24 hours in advance.

Care & Cleaning

Regular maintenance ensures optimal performance.

  1. Clean detergent drawer: Remove monthly and clean with warm water.
  2. Clean door seal: Wipe rubber gasket regularly to prevent mold.
  3. Run Self Clean+: Monthly cycle to clean drum and remove residues.
  4. Clean filter: Drain pump filter every 2-3 months.
  5. Leave door ajar: After use to allow drum to dry.

CAUTION! Unplug machine before cleaning. Use only mild detergents; no abrasive cleaners.

Regulatory Information

CE compliant; meets EU energy efficiency standards. Digital Inverter Motor covered by 10-year warranty. Eco Bubble technology patent protected. For support, visit www.samsung.com/support or contact Samsung Customer Service at 0330 726 7864 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lockCheck power supply; ensure child lock is off; close door properly.
No water intakeWater supplyCheck water taps are open; inspect hoses for kinks; clean inlet filters.
Water doesn't drainDrain blockageCheck drain hose for kinks; clean drain pump filter.
Excessive vibrationLeveling/loadEnsure machine is level; redistribute laundry evenly; remove transit bolts.
Error codes displayedVarious faultsRefer to error code list in manual; reset machine by unplugging for 1 minute.

Reset: Unplug for 1 minute or press and hold START/PAUSE for 5 seconds.

Service: 0330 726 7864; www.samsung.com/support

Samsung Washing Machine WD0804W8E User Manual © - All Rights Reserved 2025